Flyblog
| January 2003 | ||||||
| Sun | Mon | Tue | Wed | Thu | Fri | Sat |
| 1 | 2 | 3 | 4 | |||
| 5 | 6 | 7 | 8 | 9 | 10 | 11 |
| 12 | 13 | 14 | 15 | 16 | 17 | 18 |
| 19 | 20 | 21 | 22 | 23 | 24 | 25 |
| 26 | 27 | 28 | 29 | 30 | 31 | |
| Nov Feb | ||||||
Should also add that the landing as usual was a doddle. Hope it stays that way, since I've got the definitive answer re: wheels on the FAST bar - since the ZOOM frame fittings are also glued on, can't get wheels on. No problem for the moment.
10:27:19 PM
Worth recording that it also seemed I tuned out the left turn with VG on: now a slight right turn, maybe reduce the sprog by a 1/4 turn (I put a whole turn on to get it to go straight).
There's a noticable difference in the sprog screw. But of course it probably translates to a couple of mm's: and if the cable isn't exactly the same length then I suppose this is a good reason why they need adjusting.
10:07:05 PM
Bit of scratching on Saturday last: set up on Sasso and took off towards the end of a cycle: climbs were quite OK but small and considering I'm still tuning in it was a bit hopeful to think I'd stay up long. Better take off this time (no radical dive) and in fact some decent flying. Turns still not fully coordinated; but I'm sure by next flight I'll start to get it together - just need some more obvious thermal conditions. By the end of this month we'll be there...
10:02:51 PM